Following instructions are provided without any warranty, and may even get you in trouble legally. The instructions are provided for testing, and should be use with care. We (including commentators) are not responsible for any damage to your device(s).
This may enable additional channels and power (in most cases don't) on ASUS Merlin provided routers.
The nvram settings have been tested on a ASUS RT-AX58U, they may work on other models as well (ASUS RT-AC78U).
Please use nvram dump
and adjust when needed, as they may differ on your device!
Credits to the commentators below, and members on the SNBForums posting instructions. Please post your findings, and help others when needed. :)
See https://www.htpcguides.com/enable-ssh-asus-routers-without-ssh-keys/ for instructions.
nvram dump > dump.txt
NOTE: You need to copy the dump.txt (or output by
nvram dump
to somewhere else), as they will be lost on reboot
Make sure
Enable JFFS custom scripts and configs
, is enabled in System settings. See https://github.com/RMerl/asuswrt-merlin.ng/wiki/User-scripts for details.
Make sure to also run the following commands:
nvram set jffs2_scripts="1"
nvram commit
Create the /jffs/scripts/wl
file, and paste the nvram
overwrites into this file (see given example file).
Create/adjust /jffs/scripts/init-start
:
#!/bin/sh
[ -x /jffs/scripts/wl ] && /jffs/scripts/wl &
# [ -x /jffs/addons/AdGuardHome.d/AdGuardHome.sh ] && /jffs/addons/AdGuardHome.d/AdGuardHome.sh init-start & # place before addons
Create/adjust /jffs/scripts/services-start
:
#!/bin/sh
/jffs/scripts/wl >/dev/null 2>&1 & # wl
# /jffs/scripts/scmerlin startup & # scMerlin
Create/adjust /jffs/scripts/service-event
:
#!/bin/sh
if echo "$2" | /bin/grep -q "wireless"; then { /jffs/scripts/wl service_event "$@" & }; fi # wl
Create/adjust /jffs/scripts/service-event-end
:
#!/bin/sh
if echo "$2" | /bin/grep -q "wireless"; then { /jffs/scripts/wl service_event "$@" & }; fi # wl
Make sure the scripts are executable:
chmod a+rx /jffs/scripts/*
You need to reboot the router to apply changes:
reboot
To make the changes persistent, make sure to add them to the jffs/scripts/wl
script.
is there any way to set the territory code on an ac86u? i have also tried creating a chrono job, but nothing, once the router reboots it returns WE/02 and the AC script is not activated. also i would like to understand which country this code belongs to because it does not appear anywhere